Digital multimeter continuity tester Multimeter with 6000 counts True RMS digital household measuring device temperature measurement outer conductor identification continuity test backlight

$25.99

Intelligent digital multimeter – With our digital multimeter you can measure DC voltage up to 1000 V, AC voltage up to 750V, AC / DC current up to 10A, resistance up to 60MΩ, capacitance up to 100mF. CAT IV up to 600V, CAT III up to 1000V. 6000Counts display. Please read the instructions carefully before use.

6 * 3.7 cm LCD screen and simple operation – switch on the dial and the LED indicators on the sockets light up accordingly. Connecting the cables is very easy. Large backlit LCD display. The flashlight on the back and the large screen make reading easier.

Non-contact Voltage Detection & Live Line Test – When the measuring device is live, the LED display lights up, a signal tone is audible and NCV is shown on the display; If the connection is live (phase is detected), the LED display lights up, a signal tone is audible and L IVE is shown on the display.

Beep continuity test with LED – If the measured resistance is not more than 40Ω, the sensor LED (green display) lights up and the signal tone sounds continuously. If the measured resistance is between 40Ω and 60Ω, the sensor LED lights up (red display).

Scope of delivery – 1 x PM18C KYG digital multimeter, 4 x 1.5v AA batteries, 1 x multilingual user manual, 2 x test leads (red / black), 1 x water test cable. Friendly and thoughtful customer service will always be with you.

Description

KYG Digital multimeter an indispensable tool for your home

Our multimeter is a very practical home tool, whether you are enthusiastic about electronic technology or not.

As long as you follow the instructions, you can see that our multimeter has the following functions:

AC and DC voltage measurement

Measurement of resistances and diodes

Continuity test

Measurement of capacitors and transistors

Measurement of frequency and temperature

Neutral and live measurement

At the same time, our multimeter has a flashlight and backlight function, a reading hold function and an automatic sleep function to make it easier for customers to use. 6 * 3.7 cm LCD screen offer you a good reading experience. The outer protective rubber cover can maximize the protection of the user’s personal safety.

What’s in the box?
  • 1 x PM18C KYG digital multimeter
  • 4 x 1.5v AA batteries
  • 1 x multilingual user manual
  • 2 x test leads (red / black)
  • 1 x water test cable
  • Product size: 55 * 185 * 37mm
  • Weight: 420g

NCV function

Turn the rotary switch to the NCV position and close the top of the meter to the wire to sense the voltage.

Note: Even if there is no display, the voltage can remain.

Temperature measurement

Turn the downward rotary switch to ° C and °. With the help of a thermocouple, the water temperature can be measured with a stable measured value.

Note: The maximum temperature that can be measured with the supplied thermocouple is 250 degrees

Measurement of AC or DC voltage

The multimeter cannot measure an effective voltage above 1000 V DC or 750 V AC to avoid electric shock or damage to the instrument

Insulating sleeve

Plastic protective cover can play a good role in insulation to largely protect the user from electric shock and injury.

Backlight

The flashlight is located on the back of the meter, which is very convenient for buyers. Backlit screen function to read data more clearly.

Trade fair performance storage location

The measuring line can be placed neatly on the back of the instrument. Avoid easy access and loss.